Choose the Optimum Camera Setting for Every Meas­ure­ment Situ­ation with High­Sense

Different measurement scenarios often require temperature measurement ranges or integration times that vary from the initial factory calibration and are individually adjusted. Usually the calibration is invalid as a result of such adjustments and the thermographic camera no longer provides any accurate temperature measurements. HighSense opens up an alternative. Thanks to this innovative function, the measurement accuracy of the cameras is also preserved when integration times or the measurement ranges are changed. With maximum flexibility users also save costs, for example, by avoiding additional application-specific special calibrations.

HighSense calibration of ImageIR from InfraTec

This is How Users Set up Indi­vidual Custom­ized Temper­ature Meas­ure­ment Ranges

HighSense enhances the existing factory calibration of the thermographic camera. It enables the possibility of setting up individual customized temperature measurement ranges in two different ways.

The first one allows for the selection of a desired integration time. After entering the integration time via the intuitive software interface, the resulting temperature measurement range is calculated automatically and can be used for accurate measurements. At the same time, the selected lens as well as neutral density filters or spectral filters are also taken into account.

The second way addresses the issue of the temperature measurement range. This can be specified by defining an upper and lower limit. Afterwards, the appropriate integration time is calculated again to achieve the optimum signal-to-noise ratio and stored as setting parameter for the planned measurement task. Depending on whether a particularly high thermal sensitivity or the maximum possible frame rate is paramount – with the appropriate adjustment of integration times and the resultant automatically generated temperature measurement ranges the HighSense feature offers considerably more flexibility in order to optimally fulfil the measuring tasks at hand.

No Addi­tional Calib­ra­tion of Indi­vidual Sub-frames

In addition, the calibration of individual sub-frames is no longer necessary. The adjustment of the calibration data, which applies to these frames, takes place automatically as well. On this basis, accurate temperature measurement values are also provided for the corresponding window modes. Thus, the choice of the temperature measurement range as well as the integration time does not depend on whether the image should result in full-frame mode or in sub-frame mode, which can be used to achieve a higher frame rate.

Conveni­ently Store Settings for Recur­ring Tasks

Thanks to HighSense, users of the ImageIR® have the option to set up individual measurement ranges based on the factory calibration, which are best suited to the task at hand. The software also offers the possibility of storing a multitude of such ranges in a clearly visible way. Individually named and permanently stored, the user can access these settings quickly. The same holds true when it comes to changing, renaming and deleting the profiles.

HighSense is available for various camera models of the ImageIR® series. Systems that have already been delivered can optionally be enhanced by this function.

Further inform­a­tion about camera series ImageIR ®

Relevant Indus­tries & Applic­a­tions

thermal imaging in electronics

Elec­tronics & Elec­trical Engin­eering

Measure temperature distributions of smallest electronic components with infrared cameras.

thermal imaging for automotive applications

Auto­motive Industry

Infrared camera systems help you to secure a high product quality in production and at your suppliers.

thermal imaging in aviation

Aerospace Industry

Comply with highest security demands by applying state-of-the-art infrared camera systems.

All branches and application areas
Contact to thermography division of InfraTec

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.

Europe & Rest of World
InfraTec GmbH Infrarotsensorik und MesstechnikGostritzer Straße 61 - 6301217 DresdenGERMANY

Further Glossary Items relating to HighSense

InfraTec thermography - High-speed Mode

High-speed Mode – Increase Frame Rate and Sens­it­ivity

Due to the binning technology, infrared cameras have two speed modes – the standard mode and the high-speed mode, in which the frame rate increases more than three times. The field of view remains constant in both modes, so the scene captured by the camera does not change. In high-speed mode, the thermal resolution also increases by a factor of two.

Thermography with ImageIR series - HDR feature - Picture credits: © iStock.com / Vershinin M

HDR – Simultaneous Mapping of Wide Temperature Ranges

The High Dynamic Range (HDR) function of the Infrared ImageIR® camera series enables measurement scenarios with extremely different temperatures to be recorded continuously. When recording in HDR mode, multiple thermograms with different integration times and different filters are recorded quickly in succession and compiled into an overall image with a high dynamic range. The measuring range can span up to 1,500 K. Users obtain high-contrast images in a wide temperature range characterized by high measurement accuracy.

MicroScan feature ImageIR

Micro­Scan – Quad­ruple the Image Format

Behind the function is a fast-rotating MicroScan wheel, which is integrated into the camera. It ensures that four different individual exposures are taken per wheel revolution, which are offset laterally by half a pixel each. In this way, thermography achieves a new quality due to thermal images providing a quadrupled spatial resolution.

Significantly extended temperature range using the MIT function

Multi Integration Time (MIT)

To measure temperatures spanning more than one calibration range requires the acquisition of multiple thermograms with different calibrations. This can be achieved by using our Multi Integration Time feature (MIT). This function increases the dynamic range up to 16 bit and significantly extends the temperature measurement ranges.

Thermal image during ignition of an airbag  Image Small

Window Mode (Subwin­dowing) – Capture of Rapid Sequences

The thermal imaging camera can be operated in full, half, quarter and sub mode. With the camera control software, it is possible to use the extended subwindowing function. Using click-and-drag, freely definable sections can be set up quickly and conveniently. A defined sub-frame of the detector is picked out to achieve these extremely high refresh rates.

Thermografie-Kameraserie ImageIR® mit neuer 10 GigE-Schnittstelle

10 GigE Inter­face for a Strong Increase in Output

The 10 Gigabit Ethernet interface of the high-end camera series ImageIR® opens this extremely fast transmission standard with a NIC specially developed by InfraTec. This works with optical or electrical transceiver modules that are easy to change and are called SFP+.

Thermography Cameras using HighSense*

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hs

Image Format(640 x 512) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hp

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300 hp

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300

Image Format(640 x 512) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300 hs

Image Format(640 x 512) IR-Pixel
Detector typeT2SLS or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8800

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 7300

Image Format(640 x 512) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 5300

Image Format(320 x 256) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 4300

Image Format(320 x 256) IR-Pixel
Detector typeMCT