Infrared Camera Series

ImageIR® 4300

The entry door to spectral thermography

  • Motorized remotly controlled filter wheel for spectral thermography includable

  • Seperatable filter and aperture wheels can allow for highest flexibility

  • High thermal resolution for precision measurements

  • Modular design for application specific configuration and successive adaption to increasing needs

Infrared camera ImageIR® 4300 Series from InfraTec
Monitoring of a drilling process
Infrared camera ImageIR® 4300 Series from InfraTec
Infrared camera ImageIR® 4300 Series from InfraTec
Infrared camera ImageIR® 4300 Series from InfraTec
Infrared camera ImageIR® 4300 Series from InfraTec
0 | 6
InfraTec Infrared camera
InfraTec-icon-Detector-320x256
Detector Format

Large detector enables highest sensivity

InfraTec Icon Vollbildfrequenz 75 Hz
IR-Frame Rate

Analysis of extreme temperature changes and gradients in full frame

InfraTec-icon-messgenauigkeit-2
Measurement Accuracy

Highly accurate and repeatable measurements

InfraTec Icon 20 mK
Thermal Resolution

Precise detection of smallest temperature differences

InfraTec icon integration time
Shortest Integration Time

Accurate temperature measurements of fast processes

InfraTec Icon - 30 µm Pitch
Pitch Dimension

Precise measurement of low temperatures and very fast integration times

InfraTec Icon GigE
GigE Vision Compatible

Standard interface for easy integration into existing process environment

Measure Precisely over a Long Time

A high long-term stability of the thermographic measurement with infrared camera systems of the ImageIR® 4300 series is achieved by an excellent thermal decoupling of the electronics module which will emit heat during its operation from the optical and detector module being most important for the signal receipt.

Lenses of infrared camera series ImageIR®

Focus the Thermal Radi­ation Loss-free with Quality Lenses

In the field of thermography, low temperatures result in lower infrared radiation and thereby in smaller signal for the infrared camera. That is why all the available signal should be used. The lens is the part of the infrared camera getting in touch with the infrared radiation at first and therefore it plays an important role. Precision lenses being coated with an anti-reflection film for avoiding disturbtions take care that the whole infrared radiation will be focussed to the detector of the of the ImageIR® 4300 series. Within this series of infrared camera systems, a wide range of lenses - starting with telephoto lenses up to microscopic lenses – can be found, too.

InfraTec accessories - SIL lens

Solid Immer­sion Lens (SIL) for ImageIR®

In order to make particularly small structures clearly visible, an infrared camera with a large detector format is suitable. In some cases, special measurement and testing tasks require a further increase in spatial resolution. In the field of micro-thermography, high-performance infrared microscopic lenses are used for this purpose. Their benefits can be further increased in conjunction with Solid Immersion Lenses (SIL). Mounted on the optics, these immersion media significantly improve the resolution of even the smallest structures in the µm range.

Rotating aperture wheel and filter wheel for infrared camera

Make Use of Spec­tral Filters for Material Specific Meas­ure­ments

Material specific emissivity and transmissivity properties have to be taken into account while measuring with infrared camera systems. The integration of spectral filters makes use of those specifics for special measurements. For example, spectral ranges of thin PE foils can be excluded in case they are highly transmissive – to say transparent. Like this only the radiation will be measured which is purely emitted by the foil itself. Based on its long experience in thermography InfraTec can support you in selecting the right spectral filter. The infrared camera systems of the ImageIR® series can integrate a remotely controllable filter wheel which can hold up to four spectral filters. The filter position close to the detector can avoid warm aperture effects and allows for the usage of smaller and thereby cheaper filters in the infrared camera.

Extend Your Temper­ature Meas­ure­ment Range with an Auto­matic Aper­ture Setting

The temperature measurement range of the ImageIR® infrared camera series can be widened by an integrated aperture wheel. The motorized aperture wheel can be controlled by the camera control itself. Working with calibrated measurement ranges the appropriate aperture will even be automatically set in the infrared camera. When filter and aperture wheels are separately integrated ImageIR® camera series will be especially flexible in handling specific measurement situations.

Easily Transfer Your Radiometric Data to the Computer

You will be able to work with both radiation proportional data formats and also directly with temperature data in °C or °F. You will receive the data by setting your specific parameters in the easy handling acquisition interface of the ImageIR® series at a frame rate of up to 2.5 kHz.

Detect Smal­lest Temper­ature Differ­ences Using High Thermal Resol­u­tion of 20 mK

The thermal resolution of the ImageIR® infrared camera series allows you to measure smallest temperature differences of (at 30 °C). Thermal images with a narrow temperature span display details absolutely sharp. You will find interesting signatures even there where other infrared camera systems cannot detect any temperature differences any longer.

Increase Your Flex­ib­ility by Using the Modular Design Concept

The ImageIR® series is based on a modular concept and allows for successive upgrading and changes of powerful components like motorized lenses or a high-speed shutter. Already in its basic configuration it can be delivered with different detectors which support your application the best way. Like this you will always remain flexible and optimally adapt your camera systems to your respective needs.

Further inform­a­tion about the modular design concept

Modular design of infrared camera ImageIR® from InfraTec

Further Functions

ImageIR filter wheel replacement

Multispectral Feature

The multispectral feature makes it possible to record sequences with constantly changing spectral filters. Images are recorded synchronously with a rapidly rotating filter wheel equipped with the filters. It may be possible to switch between up to seven filters, depending on the version. Due to this the multispectral measurement can be optimised to suit the measuring task if the preset ranges are unsuitable. The integration times can be adapted within the limits calibrated for this filter.

HighSense for thermographic camera series ImageIR®

High­Sense – Always the Optimal Camera Setting

Thanks to HighSense, ImageIR® users have the option of setting up individual measuring ranges based on the factory calibration that best suit the respective task. Depending on the measuring task, the required temperature range can be selected and the optimum integration time for this purpose is calculated – or one decides to proceed in reverse order. Thus, the calibration can be retained even in the case of changed integration times.

InfraTec Service Calibration Rig

Auto Calibration

The Auto Calibration option expands the HighSense function to include automatic, dynamic adaptation of the integration time. This ensures the utmost temperature measuring accuracy and an optimised signal-to-noise ratio throughout the process. The wellfill of a detector is usually optimal in certain areas of the dynamic range. If the measured object signal is outside theses or user-specified limits, the integration time is readjusted.

InfraTec glossary - ImageIR® mobile wireless camera remote control

Mobile Wire­less Camera Remote Control

Stationary camera systems are usually used PC-controlled. Alternatively, InfraTec offers a solution that makes the operation of the camera system even more versatile. An additional tablet PC is attached to the camera housing, which enables wireless control of all camera functions. The display solution allows access to all functions of the IRBIS® online control and acquisition software, delivered together with the camera.

InfraTec Glossary Motorfocus

Motor Focus for ImageIR® Full Lenses – More Comfort

All interchangeable standard lens systems of the ImageIR® series can be combined with a motor focus unit, which is controlled by the camera operating software. It enables precise, remote and fast focusing. In addition, an autofocus function is available which operates reliably even with low image contrasts.

Thermal image during ignition of an airbag  Image Small

Window Mode (Subwin­dowing) – Capture of Rapid Sequences

The thermal imaging camera can be operated in full, half, quarter and sub mode. With the camera control software, it is possible to use the extended subwindowing function. Using click-and-drag, freely definable sections can be set up quickly and conveniently. A defined sub-frame of the detector is picked out to achieve these extremely high refresh rates.

Integ­rated Trigger / Process Inter­face and Inter­faces – Digit­ally Controlling of a Infrared Camera and External Devices

The internal trigger interface guarantees highly precise, repeatable triggering. Each of the two configurable digital inputs and outputs are used to control the camera or to generate digital control signals for external devices. In this way, for example, the operation of a printed circuit board and the interval of a measurement can be synchronised.

The selection of different camera interfaces allows the processing of analog data, such as the voltage directly through the camera and thus the insertion of this information into the thermal image data. Relevant variables can be included in the evaluations with the software, which makes it easier to draw conclusions about the causes of temperature changes.

InfraTec thermography - Thermal resolution

Thermal Resol­u­tion – Determ­in­a­tion of Differ­ences of Only a Few Millikelvin

For detection of small temperature changes InfraTec's infrared cameras offer thermal resolutions up to < 15 mK in real-time operation. By using the Lock-in Thermography method it is possible to further increase this resolution significantly. For this purpose test objects are periodically excited and non-destructively examined for defects and irregularities.

Tech­nical Specific­a­tions of ImageIR® 4300 Series

Spectral range(3.7 … 4.8) µm
Pitch30 µm
DetectorMCT
Detector format (IR pixels)(320 x 256)
Image recording principleSnapshot
Readout modeITR
Aperturef/2.0
Detector coolingStirling cooler
Temperature measuring range(-40 ... 300) °C, up to 3,000 °C*
Measurement accuracy± 2 °C or ± 2 %
Temperature resolution at 30 °CBetter than 0.02 K
Frame rateUp to 75 / 265 / 706 Hz
Window modeYes* (full frame / sub frame)

* Depending on model

** In selected measurement ranges

Field of View Calculator for Your Measurement Task

Configure Your Camera System

Each measurement or testing task has its own characteristic basic conditions. For getting optimal results camera, detector and lens have to be perfectly matched to one another. The field of view calculator helps you to determine the appropriate combination.

Field of View Calculator of the ImageIR®
Soft­ware

Compre­hensive Ther­mo­graphy Eval­u­ation Soft­ware for Effi­cient Oper­a­tion

The software family IRBIS® 3, which was developed by InfraTec, is part of a complete system of the camera series ImageIR®. The comfortable and professional thermography software IRBIS® 3 professional offers a wide range of analysis- and editing tools to analyse sophisticated thermal investigations. The combination of ImageIR® together with the professional thermographic software meets all requirements that are set as standard for efficient high-performance tools for thermographic investigations.

Read more about ther­mo­graphy soft­ware IRBIS® 3

Analysis Software of Software Family IRBIS® 3

Product Flyer

Get all the information you need at a glance in our product flyers

InfraTec ImageiIR 4300 flyer
InfraTec research projects - Picture credits: © iStock.com / ALLVISIONN

Partner of Research and Science

InfraTec expands its expertise in the field of thermography by participating in various research projects. This selection of projects illustrates which topics we are promoting and which partners we are working with, therefore.

Camera protective housing for infrared cameras by InfraTec

Wide Range of Protective Hous­ings

The InfraTec product range includes numerous protective housings. The all-weather and robust metal housings allow the use of the thermal cameras in harsh environments and protect against mechanical stress, dust and splash water. Depending on requirements, users can also choose ATEX-certified protective housings that can be used in potentially explosive atmospheres.

InfraTec Trade Shows & Conferences - Trainings

Prac­tical Seminars

A detailed briefing by our specialists is always part of the delivery of your thermographic camera. Upon request, we can also extend this offer to a comprehensive seminar with the contents of thermal imaging, which are important for you when using the camera. In this way, you can ensure that your employees are optimally prepared for the daily handling of the entire system. We will be happy to organise a suitable seminar at your premises.

InfraTec research projects - Picture credits: © iStock.com / ALLVISIONN

Partner of Research and Science

InfraTec expands its expertise in the field of thermography by participating in various research projects. This selection of projects illustrates which topics we are promoting and which partners we are working with, therefore.

Camera protective housing for infrared cameras by InfraTec

Wide Range of Protective Hous­ings

The InfraTec product range includes numerous protective housings. The all-weather and robust metal housings allow the use of the thermal cameras in harsh environments and protect against mechanical stress, dust and splash water. Depending on requirements, users can also choose ATEX-certified protective housings that can be used in potentially explosive atmospheres.

InfraTec Trade Shows & Conferences - Trainings

Prac­tical Seminars

A detailed briefing by our specialists is always part of the delivery of your thermographic camera. Upon request, we can also extend this offer to a comprehensive seminar with the contents of thermal imaging, which are important for you when using the camera. In this way, you can ensure that your employees are optimally prepared for the daily handling of the entire system. We will be happy to organise a suitable seminar at your premises.

Contact to Support

Do You Want to Know More About the InfraTec Service?

Our experienced service team will be happy to assist you.

Asso­ci­ated Ther­mo­graphic Auto­ma­tion Solu­tions

Industries & Applications for this Infrared Camera

Active Thermography - Picture Credits: © Rainer / Fotolia.com

Active Ther­mo­graphy

Make use of active thermography for non-destructive and contact-free material testing, for both automated inline and offline solutions.

additive manufacturing

Additive Manu­fac­turing

By in-line monitoring of thermal process parameters, infrared cameras from InfraTec support the optimisation of additive manufacturing processes.

All branches and application areas

The Following Infrared Camera Models Might also be of Interest to You:

InfraTec Infrared camera
High-end Cameras

ImageIR® 5300

Image Format(320 x 256) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 7300

Image Format(640 x 512) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300

Image Format(640 x 512) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300 hp

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8800

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 9300

Image Format(1,280 x 1,024) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hp

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hs

Image Format(640 x 512) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9500

Image Format(2,560 x 1,440) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 10300

Image Format(1,920 x 1,536) IR-Pixel
Detector typeInSb

Choose Your Infrared Camera

Choose from more than 30 infrared camera models. Our product range includes includes compact and system cameras, high-end systems as well as zoom cameras and OEM solutions.

Camera filter for infrared cameras